User's Manual
Table Of Contents
- _
- INTRODUCTION
- Scope
- Purpose
- Glossary of Terms
- Key to AFL RF Module Drawing Symbols
- EC DECLARATION OF CONFORMITY
- 1. SAFETY CONSIDERATIONS
- 2. OVERVIEW/ SYSTEM DESCRIPTION
- 3. FIBRE-FED BDA (60-165801)
- _
- 4. INSTALLATION
- 5. MAINTENANCE
- APPENDIX A INITIAL EQUIPMENT SET-UP CALCULATIONS
Meadowlands Fiber Fed BDA Equipment
User Handbook
Handbook Nō.-60-165801HBKM Issue No:-1
Date:-03/01/06
Page:-
14 of 25
3.2 FO BDA Electrical Specifications
PARAMETER SPECIFICATION
217.5-218.0MHz (Tx)
Frequency range:
219.5-220.0MHz (Rx)
Bandwidth: 0.5MHz
Gain: 0dB
Uplink Gain Adjustment: 0 - 30dB (in 2dB steps)
Downlink gain adjustment: 0-15dB (in 1dB steps)
Uplink Power: 1W
Downlink Power: 40W (20W x2)
IP3: Uplink 47dBm
IP3: Downlink 54dBm
Noise Figure: <6dB
VSWR: better than 1.3:1
RF Connectors: N type, female
F/O Connectors: FC/APC
operational:
-10°C to +55°C
Temperature range:
storage:
-40°C to +70°C
1 PSU
2 FO Modules
Alarms Fitted:
(volt-free contacts/TTL)
3 Amplifiers