User Manual

AXELL D-CSR 3302 US VHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
34 Doc PN 0034B-UM Rev. 2.1 © Axell Wireless Ltd
To activate the D-CSR SNMP Agent
1. In the Hover menu (hover over the header), select SNMP. The following pane appears:
2. Set the SNMP Agent toggle to ON.
3. Set the port and the Read-Only community.
4. Click Apply.
6.5.4 TCP/IP and Ethernet
TCP/IP communication is run over a company’s network. Therefore, each company needs
to define the details regarding the configuration, IP addresses, etc.
TCP/IP Communication Setup
1. Hover on the Home page Title bar and choose Communication from the displayed
icons.
2. From Device:Method select ETH:TCP (Ethernet:TCP/IP).
3. Click Apply.