User's Manual

AXELL CSR 3604-3304 UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd
Document number: 3633B-UM
Page 53 of 67
26/10/2015
Revision. 4
Monitoring and Troubleshooting 10
10.1 Monitoring
The CSR Repeater provides the following monitoring and fault sourcing tools:
 Logs screen – shows alarms and information messages according to user definitions in
the Thresholds screen
 Alarm Classification and Threshold – screen allowing user configuration of the alarm
generation criteria
 Main screen – displays a summary of all configured channels, module status and general
information
 Site information and system performance – site details, system SW and HW versions and
system performance indicators.
10.1.1 Logs Screen
The Alarms Log displays the last 100 alarms and/or user actions on the remote system in a
chronological order. The alarms are generated according to user defined thresholds (see the
following section).
To display the Logs screen
Hover on the Title bar and click Logs. The Logs screen appears showing the latest
generated alarms and information on user actions.
You can perform the following operations:
 View more information on the log - Hover on the log
 Acknowledge a log - click on a log flag. The log flag will be green and the log details
displayed.
 Acknowledge all logs – click Ack All operation button.
 View all the logs – click on More…
Figure 10-1: Logs
Operation buttons
Acknowledged
logs – green flag
Unacknowledged
log – red flag
View more logs