User's Manual

AXELL CSR 3604-3304 UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd
Document number: 3633B-UM
Page 35 of 67
26/10/2015
Revision. 4
Login and GUI Navigation 7
This section describes how to open a session to the repeater, and provides a brief
description of the WEB GUI and describes the initial setup procedures.
7.1 Opening a Local Web Session to the Repeater
7.1.1 Connect the Repeater to the Computer
Connect computer to the Repeater Ethernet connection
Using the supplied Ethernet cable, connect either to the repeater EXTERNAL ETH port (if an
external ETH port is available on one of the side panels), or to the INTERNAL Ethernet port
(located internally at the side of the Controller).
The following figure shows an internal ETH connection to the side of the controller.
Figure 7-1. Connection to an internal Ethernet port (if external port is not available)