User Manual
Table Of Contents
- 1. INTRODUCTION
- 1.1. Scope and Purpose of Document
- 1.2. Limitation of Liability Notice
- 2. SAFETY CONSIDERATIONS
- 3. Equipment Overview
- 4 15 Channel Repeater 50-157401 Major Sub-Components
- 4.1. Downlink Splitter/Combiner 50-157402
- 4.2. Channel Module Shelf 50-157403 (6 channels)
- 4.3. Channel Module Shelf 50-157404 (3 channels)
- 4.4. 100W Power Amplifier 80-245103
- 4.5. Uplink Triplexer Shelves 50-157405
- 4.7. Uplink 5W Amplifier Shelf 50-157406
- 4.7.2. Uplink 5W Amplifier Shelf 50-157406 Specification
- PARAMETER
- SPECIFICATION
- 5. INSTALLATION
- 6. Fault Finding & MAINTENANCE
- 6.1 General Fault Finding Procedures
- 6.2 Downlink
- 6.3 Uplink
- 6.4 Fault repair
- 6.5 Checking service
- 6.6 Service Support
- 6.7 Tools & Test Equipment
- 6.8 General Maintenance Procedures
- 6.9 Module Removal (LNAs, general procedure)
- 6.10 Module Replacement (general)
- 6.11 Power Amplifiers
- 6.12 Low Power Amplifier Replacement
- 6.13 Module Transportation
- Appendix A
- _
- _
- Appendix B
Axell Wireless Limited
Technical Literature
15 Channel UHF Hybrid Select Repeater
Document Number 50-157401HBK Issue No. 1 Date 26/03/2008 Page 10 of 50
3.3. 15 Channel Repeater 50-157401 Illustrations
3.3.1. Front View
A Downlink 100W Amplifier 80-245103
B Downlink Splitter/Combiner 50-157402
C Channel Module Shelf 1 (channels 1 to 6) 50-157403
D Channel Module Shelf 2 (channels 7 to12) 50-157403
E Channel Module Shelf 3 (channels 13 to 15) 50-157404
F Uplink Splitting Triplexer 50-157405
G Uplink 5W Amplifier 1 ( 412.95 to 413.65MHz) 50-157406
H Uplink 5W Amplifier 2 ( 415.88 to 417.20MHz) 50-157406
I Uplink 5W Amplifier 3 ( 419.05 to 420.00MHz) 50-157406
J Uplink Combining Triplexer 50-157405
K 1U Blanking Panels
L Rack Door