User's Manual

12 Channel Channelised Cell Enhancer
User Handbook
Handbook N.-50-122501HBK Issue No:-A
Date:-16/03/05
Page:-
26 of 40
4.7.4 VHF/ UHF Programming Example
Frequency required: 465.5MHz
Channel spacing: 12.5kHz
Synthesiser offset: 21.4MHz
The Local Oscillator frequency is therefore: 465.4 – 21.4 = 444.0 MHz
Dividing the LO frequency
by the channel spacing of: 0.0125MHz:
444.0 = 35520
0.0125
This is an integer value, therefore it is OK to proceed.
Switch settings
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Local Oscillator
Frequency of:
444.0 MHz
1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0
Switch setting: 0 = switch DOWN (on, frequency ignored)
1 = switch UP (off, frequency added)