Specifications

CONNECTIONS AND SETTINGS ENG
Pag. 12
5.5 AUDIO OUTPUTS
The equipment features balanced XLR and unbalanced PinRca analog outputs
driven by high-quality buffers and capable of withstanding even low-impedance
loads (600Ω), with levels of up to +20 dBu. In case of unbalanced connections,
connect the cold pole (Pin 3) to the ground (Pin 1) or use the PinRca unbalanced
outputs.
Pin 1 Gnd
Pin 2 Signal
Pin 3 Return
An hardware bypass (via relay) connects the Input pair to the Output 1 XLRs in
case of AC power failure or whenever the unit is unintentionally turned off. This
prevents the transmission chain from any audio interruption.
5.6 MONO / STEREO OUTPUT MODE
Left and Right signals can be summed at the output stage of each output group. Independent mono/stereo
settings are provided for each group (i.e. pair of PinRca and XLR connectors). When set in MONO mode,
each output connector provides (L + R) / 2 signal (ref to the Block Diagram).
RIGHT CHANNEL LEFT CHANNEL
OUTPUT 1
J10
STEREO MODE J11 STEREO MODE
J10 MONO MODE J11 MONO MODE
OUTPUT 2
J12
STEREO MODE J13 STEREO MODE
J12 MONO MODE J13 MONO MODE
OUTPUT 3
J14
STEREO MODE J15 STEREO MODE
J14 MONO MODE J15 MONO MODE
OUTPUT 4
J16
STEREO MODE J17 STEREO MODE
J16 MONO MODE J17 MONO MODE