User manual

OUTPUT MODULES DESCRIPTION (OXYGEN 3 and 3 ST) ENG
Axel Technology srl www.axeltechnology.com OUTPUT MODULES
DESCRIPTION (OXYGEN 3 and 3 ST)
26
The core of the monitor section are the two monitor source buttons. The buttons allow one of the audio sources (as well
as PFL signal) to be selected for monitoring as the Monitor speaker source.
EXT IN
pressed
MASTER
depressed
Monitor speakers / headphones will reproduce the EXTERNAL Input signal (f.i. a
tuner)
„
EXT IN
depressed
MASTER
pressed
Monitor speakers / headphones will reproduce the MASTER signal
EXT IN
depressed
MASTER
depressed
Monitor speakers / headphones will reproduce the PFL signal
TALK BACK BUTTON
The TALK BACK button allows f.i. the Announcer (or the engineer) in the Control Room to transmit talkback to the Guest
headhones when the button is pressed. TalkBack circuitry is always monodirectional.
The TalBack output provides Master signal by default. Press and hold the T.B. to Studio button: it will connect the
Channel 1 audio source to the TB output (ref to Rear Panel description – Section 14.2). The Channel 1 signal will always
replace the exisisting Master signal.
NB The CHANNEL 1 signal routed to TB circuitry is picked-up POST-EQ and PRE-FADER.