User manual

Oxygen 4 Digital - from Axel Technology Phone [phone], [e-mail] Page 36
Gateway Lets you change the gateway address. This address can only be changed if the
DHCP option is disabled.
Local Date - Time
Displays the time retrieved from a NTP timeserver. NTP means Network Time
Protocol. This is a standard protocol which is used to transmit UTC-time to
clients. For more information you can visit http://www.ntp-time-server.com/
. For
the correct time to display you need to set the corresponding time zone.
Last Time Synced
Displays the last time the Oxygen 4 Digital clock was synchronized by the NTP
server. The IP address represents the chosen NTP server to
synchronize by. Last section displays the time before next synchronization. Setting
this IP address to 0.0.0.0 disables the NTP function.
HTTP Connection
Displays the time that the HTTP port 80 socket was open during data transport.
Because the time for retrieving a webpage is less than a second the section.
(normally displays 00:00:00). Also the user that opened the port is displayed.
FTP Control Connection
Displays the time the FTP control port 21 was opened and by which user. The
disconnect button disconnects any user which is connected to the port.
FTP Data Connection
Displays the time the FTP data port 20 was opened and by which user.
The disconnect button disconnects any user which is connected to the
port.
TCP Connection
The TCP connection is used for a special ActiveX application which can
run inside a browser window. The ActiveX application displays a virtual
8 fader control-unit of the Oxygen 4 Digital. With this you are able to
control the Oxygen 4 Digital from a remote area.
You can see how long the connection is opened what the delay is and
the maximum refresh-rate of the VU-bars. The disconnect button
disconnects any user which is connected to the port.
Maximum Update Speed
The refresh option lets you choose the refresh rate for the ActiveX
application. For optimum results please select a same value or lower
for the refresh than the indicated value. Choosing the refresh-rate
higher than the indicated value will result in an increased delay-time.
This affects real-time remote operation. You can also use this option to
reduce network traffic and thus save bandwidth.
Connection Information
The Oxygen 4 Digital Connection log displays a log file with maximum
of 64 entry's of the last users that logged on to the Oxygen 4 Digital
Webpage, FTP or ActiveX.