Specifications

TECHNICAL SPECIFICATIONS
Pag. 18
13 TECHNICAL SPECIFICATIONS
13.1 OXYGEN 3
INPUT A Stereo PinRCA
INPUT A levels 0 dBm (LINE – Channels 4 - 5) Unbal -12 to +12 dB gain control
Phono (RIAA – Channel 6) Unbal -12 to +12 dB gain control
INPUT A impedance (line) 10 kOhm
INPUT B Stereo Unbal PinRCA
INPUT B nominal level 0 dBm (LINE) -12 to +12 dB gain control
INPUT B impedance 10 kOhm
INPUT A Mono El. Bal. XLR
INPUT A nominal level - 70 dB (MICRO level) -12 to +12 dB gain control
INPUT A impedance > 1,5 kOhm
INPUT B Stereo Unbal PinRCA
INPUT B nominal level 0 dBm (LINE) -12 to +12 dB gain control
INPUT B impedance 10 kOhm
SEND / RECEIVE separ.
20 dB**
** it can vary depending on telephone line characteristics
In / out level on tel. line - 6 dBm on 600 Ohm line imped.
Compensation mode Electronic / automatic
Line connection 2 wire, RJ11 connector
REC outputs Unbal PinRCA 0 dB level
MASTER Output 1 & 2 Stereo El. Bal. SubD 15P - inf to + 6 dB control
MASTER Output 3 and Fixed Stereo Unbal. PinRCA
- inf to + 6 dB control (Out
3)
MASTER Mono Outputs Mono Unbal PinRCA 0 dBm
Nominal MST Output Level 0 dBu (LINE)
MST output Impedance 100 Ohm
TUNER IN Stereo Line Unbal PinRCA - inf to + 6 dB gain control
MONITOR Output Spk - Stereo Line Unbal. PinRCA -inf to + 6 dBm
Phones - Stereo Line Unbal. Jack 1/4” -inf to +12 dBm
TALKBACK Output Spk - Stereo Line Unbal. SubD 9p
AC VOLTAGE 90 / 260V ( 50 – 60 Hz) - switching power supply
POWER CONSUMPTION 20 W
DIMENSIONS 178 mm (h) x 483 mm (w) x 340 mm (d).
WEIGHT Around 5 Kg