Specifications

WIRING AND CONNECTIONS
Pag. 7
4 WIRING AND CONNECTIONS
We suggest to use high quality wires, well protected, and balanced connections to avoid external EMD.
4.1 AUDIO INPUT (SEND)
The equipment features electronically balanced XLR female inputs (line level).
XLR pinout:
Pin 1 Gnd
Pin 2 Signal
Pin 3 Return
If any balanced connection is possible, please connect the cold pole (Pin 3) to the ground (Pin 1).
Factory preset input impedance is 10 kOhm. Input impedance of 600 Ohm is also available, simply setting
jumpers on the main board (see Chapter 0).