Specifications

FRONT PANEL OPERATION
Pag. 13
Macrotel 5 and 9
− With MT button depressed, the signal received from caller is only provided on SubD Meeting connectors
(f.i. for cascade connection of several units).
** the second subscriber may listen to the first without MT button pressed only if J12 jumper is on A position (see
block diagram of Chapter 7 and Internal Settings, Chapter 6).
5.5 HK BUTTON
It allows line ‘hooking’ in the 2 WIRE mode. This switch hooks / hangs up for a 2 WIRE telephone line only.
Hook LED blinks when a call is coming in (ring) and lights firmly while line is hooked. Please note: LED
switchs on only if telephone line is connected.
5.6 METER SELECTION
LED meter shows SEND, RECEIVE or MEETING levels depending on related selector position (r, s, m).
5.7 MICROPHONE CONTROL (MACROTEL 9 ONLY)
It adjusts the microphone input level
5.8 MUTE BUTTON (MACROTEL 9 ONLY)
It mutes microphone input. The microphone is muted with the button released.
5.9 S BUTTON (MACROTEL 9 ONLY)
It enables listening to Send signal via headphone output
5.10 R BUTTON (MACROTEL 9 ONLY)
It enables listening to Receive signal via headphone output
5.11 PHONES POTENTIOMETER (MACROTEL 9 ONLY)
It adjusts headphone volume
5.12 SEND LED BAR (MACROTEL 9 ONLY)
It shows Send signal level