User manual

ENG FIRMWARE UPGRADE PROCEDURE
Page 50
I) Select the PC serial port on the screen
J) Click Connect button.
K) Make sure the Identification is correctly done (Ready to start Firmware Upgrade [3] + firmware code displayed in the
right field [2]), and click ‘Program’. In the left field [1] you can read the firmware version. The upgrade will continue
automatically.
NOTE: once the upgrading procedure has started, it must NOT be interrupted for any reason.
L) Wait for the message of successful update, then click Exit button and shut off the equipment.
M) Move the jumper ‘PRG’ back to its ‘normal operation’ position
Turn the processor on.