User manual

FIRMWARE UPGRADE PROCEDURE ENG
Page 49
D) set the jumper ‘JP1’ of the Main board to its ON / PROG position. The jumper is located on the left side of the
Main board.
E) Turn the processor on. If you are using the ‘LCD’ version, make sure “Falcon 50 FM/TV” is displayed on both
screens. If you are using the ‘BLIND’ version, make sure the ALARM led is blinking.
2) RUNNING THE UPGRADE FILES ON THE PC
F) Close all opened applications on the PC.
G) Using standard Windows procedures, access the FW UPGRADE folder
H) Double click the file associated to the desired upgrade:
NB to make sure of current version of Yr processor, please enter the Firmware Version page from the menu root.
The following screen will be displayed: