User manual

‘LCD’ VERSION - FRONT PANEL OPERATION ENG
Page 43
21 ‘LCD’ VERSION - FRONT PANEL OPERATION
In the default condition, the two LCD screens will display main settings indication, current processing curve,
date and time.
21.1 HOW TO BROWSE THE MENU
To browse the menu, press the Jog Wheel (1): the left screen (2) will display the processor block diagram,
while the right screen (3) will switch to show input and outputs current level graphs.
Use the four arrows (4) and (6) to select the desired configuration block. The selected block will be shown
in reverse color. Press the Jog Wheel (1) to access the desired block and its configuration parameters.
Use again the arrows (4) and (6) to scroll the parameter list or to move between them.
Rotate the Wheel (1) to increase or decrease the values associated to the selected parameters.
Once reached the desired value:
- press ESC to leave the menu without saving
- highlight the OK key at the bottom right corner using the 4 arrows and press the Wheel to CONFIRM.