User manual

ENG MONITORING THE FALCON 50 FROM A ‘PDA’
Page 42
To install the software on the PDA, follow these istructions
Copy the .cab file (its name will look like Falcon50.arm.CAB) on Your Pc. Perhaps this file will be associated
to a compressed file icon, such as WinRar or WinZip starndard icons.
Step 1: First step is to copy the .cab file on your Pocket PC. If you have a memory card reader, you can
copy it to the card and insert it into your Pocket PC. If you simply download the .cab file from the Web site
www.axeltechnology.com you can get it that way. Alternatively, You may use the Activesync tool.
Step 2: Navigate to your My Documents folder on your Pocket PC and you'll see the .cab file listed.
Step 3: Tap the .cab file one time and it will install!
Step4: Run the software application on the PDA from Start - Programs.
Once installed and launched the Falcon 50 application, using the PDA keyboard, You may create a Login or
just type the Login password.
This way, You may easily access the default two pages
with all the level meters (see Fig 2).
Clicking with the PDA stylus the folder at the top right
corner (see picture) You can also enter the
Import/Export facility page (see Fig 3).
Fig 1
Fig 2 Fig 3
MINIMUM PDA REQUIREMENT
CPU Samsung S3C2410 266 MHz
RAM 64 MB
Display Resolution 240x320 QVGA
Operating System Microsoft PocketPC 2003SE
USB USB Host Port