User manual

FRONT PANEL DESCRIPTION ENG
Page 25
16 FRONT PANEL DESCRIPTION
16.1 ‘BLIND VERSION’
The processor front panel contains 3 red LEDs with the following meaning:
OPERATE this LED normally flickers on when the processor works correctly. It is important in that
it gives you a visual indication of how active your system is, and can help ensure that
it is working correctly. THE PROCESSOR IS OPERATING NORMALLY WHEN
ACTIVITY LED IS FLASHING
PC LINK While the PC is properly connected to the procxessor, this LED should be lit up. If this
is not the case, then check the connection parameters and cable.
ALARM this LED (normally off) lights in the relevant cases set via the control software (f.i.
primary audio source failure, Internal Temperature exceeding 60 °C, etc).
POWER It displays the power supply presence. If the LED is not lit, make sure the main power
source is active, the main switch is on and the connector on the cord is securely
mated with the plug on the back panel.
Connection ports:
HEADPHONE
SOCKET
Any channel pair that is going through the processor can also be routed to the
headphone jack on the front panel using the MONITOR selector switch in the
software. Headphone volume is also controlled from the software.
USB PORT B Type port, designed for the easiest connection to the processor.
Special drivers are needed to be installed on the pc for proper connection. Refer to the
Chapter ‘COMMUNICATION PORTS AND GPI/O WIRING’