User manual

AUDIO AND MPX GENERAL SETTINGS ENG
Page 23
15.2 MPX OUTPUT SETTINGS (only FM version)
The Falcon 50 is fitted with two MPX outputs with independent level adjustements and three Auxiliary inputs.
The AUX input gains may be set to 0 dB or to – 20 dB (1/10 gain) through the J1, J2 and J3 jumpers located
just at the back of the respective Bnc connectors.
AUX 1 Input: is Factory preset for - 20dB gain. Gain my be altered to 0 dB using J1 jumper
AUX 2 input is Factory preset for - 20dB gain. Gain my be altered to 0 dB using J2 jumper
AUX 3 input is Factory preset for 0dB gain. Gain my be altered to – 20 dB using J3 jumper
Please note, the AUX 1 input allows to inject signals on the OUTPUT 1 only; the AUX 2 input allows to
inject signals on the OUTPUT 2 only, while the AUX 3 input allows to inject signals on both outputs.