Specifications

HARDWARE SETTINGS FALCON 15 - ENG
Page 59
11 HARDWARE SETTINGS
11.1 CHANGING THE INPUT AUDIO IMPEDANCE (MPX VERSION)
The analog input impedance may be set to 600Ω, rather than 10kΩ, by moving the two jumpers JP1 and JP2 on
the analog input board (see figure below).
11.2 CHANGING THE INPUT AUDIO IMPEDANCE (ST-OUT VERSION)
The analog input impedance may be set to 600Ω, rather than 10kΩ, by moving the two jumpers J6 and J7 on the
analog input board (see figure below) to the right-hand position.