Specifications

ST-OUT VERSION DESCRIPTION FALCON 15 - ENG
Page 32
5.8 FALCON 15 MENU TREE (ST-OUT version)
The menu tree for the Falcon 15 ST-OUT Version is shown on here below. It has all of the possible main menu
items listed along the left side.
The branching sub-menus and parameters are connected in the order they are encountered in the menu
system.
The diagram here below displays the complete Falcon 15 menu – please refer to the table on Cap. 1 for Optional
feature list.

MAIN PAGE (Preset, Agc level, Compressor levels, Input Meters)

Input Setup
 
Sensibilty

- 12 dBm ÷+ 12 dBm (1 dB step)

AGC Speed

0 ÷ 6 dB/sec (0.2 dB step)

AGC Mode

Hold=0 sec & MaxG= 08 dB;
Hold=1 sec & MaxG= 10 dB;
Hold=0 sec & MaxG= 12 dB;
Hold=2 sec & MaxG= 12 dB;
Hold=3 sec & MaxG= 15 dB;
Hold=3 sec & MaxG= 20 dB;
Hold=0 sec & MaxG= 15 dB;
Hold=0 sec & MaxG= 20 dB;

Input Source

Analogic / Digital input

Audio Mod. Setup
 
Preemphasis

50 uSec Internal / 75 uSec Internal / 50 uSec External /
75 uSec External

Output Level

- 10 dB ÷ + 14 dBm (0.5 dB step)

Output Mode

Normal / Peak Ref Tone / Bypass

Process mode

Normal (Stereo) / Mono (Left Input) / Mono (L+R)

Noise Gate

Off, - 80 dB ÷ – 51 dB (1 dB step)

Rds Setup
 
Not Installed


Serials Setup
 
Serial Port 1

Disabled / Enabled

Serial Port 2

Disabled / Enabled

System Information
 
Temperature

External Inputs

Not Installed

Firmware Version

Firmware Code