Specifications

ST-OUT VERSION DESCRIPTION FALCON 15 - ENG
Page 27
5 ST-OUT VERSION DESCRIPTION
5.1 FRONT PANEL VIEW
1 Multifunction display (LCD) multifunction display showing the equipment operating conditions
2 LCD contrast: trimmer to adjust the display contrast. Please use a small screwdriver
3 Jog-wheel: for menu scrolling and parameter settings. It can also be pressed, having the same
control function as the Enter key
4 ENTER: key which gives access to the parameters submenu and selects the new values
5 Esc: key to Esc the current menu and go back to the previous one. By pressing this key the
modifications realised by accident on the selected parameter are not executed
6 LEDS: they show external inputs status (related to M/S and TA RDS status and to Split Enabling):
The three LEDs on the front panel light as the following:
LED 1
This LED lights up while Input 1 on Digital Data Port is ‘active’ - Split Mode enabled (please refer
to § 4.4)
LED 2
This LED lights up while Input 2 on Digital data is ‘active’. Input 2 is related to M/S RDS switch
(please refer to § 10.3.1)
LED 3
This LED lights up while Input 3 on Digital data is ‘active’. Input 3 is related to TA RDS switch
(please refer to § 10.3.1)