User`s manual

Installing under UNIX/LINUX
TCP/IP AX3000 User's Manual 75
5.2.2 - Configuring VNC on the Unix/Linux Server
Warning: it is assumed that the X11 environment is already installed (utilities,
directories and files) on the Unix/Linux server.
Mount the Axel CD-ROM and copy the following files onto the hard disk:
- axvnc (VNC configuration utility, on CD supplied, under /bin). Copy
axvnc to /etc. Set execute permission by invoking chmod +x axvnc.
- Xvnc (VNC server, on CD supplied, under /bin). Copy and rename as
‘Xvnc’ the appropriate binary (Xvnc.SCO, Xvnc.LINUX, Xvnc.UW7,
Xvnc.AIX) to a local directory (i.e. /usr/local/bin). Set execute permission
by invoking chmod +x Xvnc.
The axvnc configuration utility can be used to easily set up the Unix/Linux
server. This script has been certified for Linux, SCO OpenServer, Open Unix 8,
UnixWare 7, Sun OS and HP-UX environments.
Note: for more information (i.e. for manual VNC configuration) please read
Installing and Using the Axel-VNCviewer.
The axvnc utility must be run from the graphical Unix/Linux console by invoking
/etc/axvnc.
The first operation performed by axvnc is to check the system has the
necessary components for correct VNC operation:
AXEL VNC UTILITY (V1.2-0)
-------------------------
Checking system configuration:
- Operating System:
--> Linux (runlevel 5)
- VNC server (Xvnc):
--> OK
- Misc Utilities:
--> OK
- X11 font:
--> unix/:-1
Press <CR>