User`s manual

Installing under UNIX/LINUX
74 TCP/IP AX3000 User's Manual
These parameters are:
- Resolution: Press <Space> to change the resolution.
On AX3000 models 65/65E, the resolutions available are 800x600
and 1024x768. The VGA frequency can be customized through the
'Advanced' menu (see Appendix A.10.8).
On AX3000 models 75/75E, the resolutions available and VGA
frequencies are selected through a list:
800x600 60Hz
800x600 72Hz
800x600 75Hz
800x600 85Hz
1024x768 60Hz
1024x768 70Hz
1024x768 75Hz
1024x768 85Hz
1280x1024 60Hz
1280x1024 75Hz
- Bits per pixel (available only on AX3000 models 75/75E): press
<space> to select the number of colors. Two possible values: 8
(256 colors) and 16 (65536 colors).
- Shared Session and Keyboard and Mouse Ignored: these
parameters allow several VNC terminals to share the same
graphical display (i.e. the same server frame buffer).
- Local Mouse Cursor: if 'yes', the local mouse cursor location is
indicated by a little square pointer (2x2 pixels). This can be useful
when the local mouse cursor location is different from the VNC
cursor location (for example when the Unix/Linux box or the
network are overloaded).
- Emulate a 3-button Mouse: if 'yes', the mouse middle button is
emulated by clicking both left and right buttons.
- Mouse Accelerator: if 'yes', the AX3000 speeds up the mouse
cursor.
Notes:
- The mouse is automatically enabled when a VNC session is set. The
default mouse port is PS/2 (if this port exists) or AUX2. See Chapter
3.3.3.
- After exiting set-up, we advise a power-cycle of the AX3000.