User`s manual

Installing under UNIX/LINUX
TCP/IP AX3000 User's Manual 67
To set a colouring attribute, select it and press <CR>. The following dialog box
appears:
According to the Blink allowed and Underline allowed parameters, 8 or 16
foreground and background colours are available and the Blink and Underline
parameters are enabled or disabled.
5.1.6 - Underline Attribute Management
The reverse video attribute, the bold attribute and the blinking attribute are
supported by all VGA monitors. However, the underline attribute is only
supported by monochrome VGA monitors.
If the underline attribute is essential with a colour VGA monitor, one of the
following three methods can be used, but note that each entails the loss of
some other display capability.
a) Using the Monitor as a Monochrome Monitor
This method allows all the monochrome attributes to be used but entails the
loss of all colour.
The monitor is set to operate as a monochrome monitor. All AX3000 sessions
appear in monochrome and the AX3000 colouring mode is totally unavailable.
To set a VGA colour monitor to monochrome, enter the set-up, set
[Configuration]→[Terminal]→[General]→[Screen Type] to 'Monochrome'.