User`s manual

Interactive Set-Up
TCP/IP AX3000 User's Manual 45
Enter the following parameters:
- Enter the current password: Only if the set-up is already password
protected, you will be asked to enter the current password.
- Enter the new password: enter a new password of maximum five
characters, or press <CR> if no password is required.
- Please, confirm: re-enter the identical password.
3.7.2 - Entering Set-Up
If the set-up is password protected, the following dialog box will be displayed
the next time access is attempted:
Three operations are permitted:
- enter the password to access the set-up
- press <Esc> or select the [CANCEL] button to exit set-up mode
- select the [CONSULTATION] button to access the set-up without using
the password. All set-up operations will be permitted but it will not be
possible to save the modifications in non-volatile memory.
IMPORTANT: if the password is forgotten, the super password 'yaka' can be
used.