User`s manual

Interactive Set-Up
42 TCP/IP AX3000 User's Manual
To set the rtty service on the xxx auxiliary port, enter the following parameters in
the [Configuration]→[Ports aux.]→[xxx] dialog box:
- Associated Service: select rtty.
- Net Service Parameters: press <Space> to access the following box:
- Port TCP: numeric value associates to this auxiliary port.
- NL=CR+NL Filter: The line feed character 0x0A can be mapped to
carriage return + line feed 0x0D 0x0A,
- Always Accept New Connection: set the AX3000 behaviour
when a rtty connection is already established and a second
connection rtty is received.
b) Using the rsh Command to Print
The embedded rcmd service allows files to be printed through the rsh command
(or rcmd command, according to the operating system in use).
To set the rcmd service on the required auxiliary port, select the rcmd service
from the [Configuration]→[Aux. Ports]→[xxx] dialog box. Then enter the
name of the associated printer port.
For more information about the rsh command, refer to Appendix 5.3.2.
c) Using printd Legacy Service
The printd service has been used in the past, under the UNIX axconf utility, to
control printers. To maintain backward compatibility it's still available, but the lpd
and tty services should always be used in preference.