User`s manual

Interactive Set-Up
TCP/IP AX3000 User's Manual 41
To set the tty service on the xxx auxiliary port, enter the following parameters in
the [Configuration]→[Ports aux.]→[xxx] dialog box:
- Associated Service: select tty.
- Net Service Parameters: press <Space> to access the following box:
- Host: name of the host selected from a menu (see Chapter 3.1.2
or 3.2.3).
- TCP Port: numeric identifier of the tty service on the target host.
The TCP Port default value is 2048.
- Auto-Reconnection: if this parameter is set to 'yes', a new
connection is automatically established after a disconnection.
Otherwise, the AX3000 must be power-cycled.
Note: Axel provides a UNIX utility by which pseudo-terminals may be
associated with AX3000 serial ports. The AX3000 ports then appear as local
UNIX ports. For more information, see Chapter 5.4.
3.5.6 - Other Uses
a) Using rtty
With the rtty service, the AX3000 acts as a server. The AX3000 "listens" on a
given TCP port. Then, a connection can be established from a Windows or Unix
box to send or received data.
Note: the rtty service can also be used with the Axel daemon (axttyd) under
UNIX (see Chapter 5.4).