User`s manual

Interactive Set-Up
40 TCP/IP AX3000 User's Manual
To configure the telnet service for the chosen serial auxiliary port, select the
[Configuration][Ports aux.][AUXx] dialog and enter the following
parameters:
- Associated Service: select telnet.
- Net Service Parameters: press <Space> to access the following dialog
box:
- Host: name of the host selected from a menu (see Chapter 3.1.2
or 3.2.3).
- TCP Port: numeric identifier of the telnet service on the target host.
The TCP Port default value is 23.
- TERM Value: the value of this variable is 'negotiated', between the
host and the AX3000.
- Auto-Connection: if this parameter is set to 'yes', the connection
will be automatically established when the AX3000 is powered-up.
Otherwise, the user can press any key on the serial terminal
keyboard to establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new
connection is automatically established after a disconnection.
Otherwise, the user can press any key on the serial terminal
keyboard to establish a new connection.
Note: the serial auxiliary port used must be configured for 'bi-directional'
operating mode.
3.5.5 - Connecting other Peripherals
The tty service provides bi-directional control of the device.