User`s manual

Interactive Set-Up
TCP/IP AX3000 User's Manual 31
A connection is characterised by the following parameters:
- Connection Type: telnet, tty or vnc.
- Host: host name, selected from a menu (see Chapter 3.1.2 or 3.2.3). If
this field is left blank, the host name will have to be entered for each
connection.
- TCP Port: numeric identifier of the service (telnet, tty or vnc) on the target
host. The TCP Port default value is 23 for telnet, 2048 for tty and 5901 for
vnc.
- Auto-Connection: if this parameter is set to 'yes', the connection will be
automatically established when the AX3000 is powered. Otherwise, the
user can press <Alt><Fx> to establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is
automatically established after a disconnection. Otherwise, the user can
press <Alt><Fx> to establish a new connection.
- Login Script: a "login script" can be set to automatically enter user
names and passwords at the login prompt. For more information, see
chapter of each operating system.