User`s manual

Interactive Set-Up
TCP/IP AX3000 User's Manual 29
- Post-hardcopy String (available if "default port" isn't "none"): character
string sent after an hardcopy (for example "\0C" is a form feed)
3.3.4 - The Mouse
Note: There is no PS/2 port on AX3000 models 55/55E. For these models a
serial mouse can be connected to AUX2.
The Mouse parameter allows the mouse port to be set:
- none: no mouse
- PS/2: no additional setting is needed.
- AUX2: for more information see Chapter 3.5.1.
The mouse will be available after rebooting.
Depending on the emulation, the use of the mouse may need to be declared
within the session profile ("General Parameters" box). See Chapter 5.1.4 or
6.1.5.
3.4 - SETTING EACH SESSION
The AX3000’s built-in multi-connection capability allows simultaneous access to
up to 8 different hosts on one or more Ethernet networks.
Note: the session number is set via the multi-session dialog (see Chapter 4).
These independent sessions each have:
- a connection: TCP/IP protocol and associated host
- a virtual terminal: emulation, function key values, number of lines, etc