User`s manual

Interactive Set-Up
TCP/IP AX3000 User's Manual 23
The parameters of the DNS box are:
- DNS Servers: to resolve a name, the AX3000 sends DNS requests to a
DNS server. The IP address of this DNS server must be known. The
AX3000 set-up procedure allows two DNS servers to be set.
Note: if 'DNS Servers' is enabled in the AX3000 Interface box (see
Chapter 3.2.1) these two parameters are supplied by DHCP and cannot
be accessed here.
- Default DNS Domains: theses domains can be used during the
resolving operation (see Chapter 3.2.3 and Appendix A.5).
Note: if the '1st DNS Search Domain' is enabled in the AX3000 Interface
box (see Chapter 3.2.1) the '1st Domain' parameter is automatically set
and cannot be accessed here.
3.2.3 - Host Management
A host is a TCP/IP machine (UNIX, AS/400, etc) to which the AX3000 can open
connections (telnet, tty and VNC).
To configure the host table, select the [Configuration]→[TCP/IP]→[Hosts]
menu. A dialog box as shown below is displayed: