User`s manual

Interactive Set-Up
18 TCP/IP AX3000 User's Manual
Add a Host: move the highlight cursor to a vacant line and enter the name and
IP address of the host.
Delete a Host: select the [DELETE] button and select, from the menu, the host
to be deleted.
Change a Host: move the highlight cursor over the name or IP address of the
host and enter the new value.
Select the [OK] button to exit the dialog. Any incomplete host definitions will
automatically be deleted).
3.1.3 - Router Management
A router is either a special electronic unit, or a suitably configured host
computer, which enables data to be sent across two or more distinct physical
networks.
One router can be nominated as the 'default router' and then used to access
any networks. Use of a default router simplifies site network administration. The
default router is only identified by its IP address.
However additional routers can also be declared, to reach specific destination
hosts or networks. Any such router must be identified with 3 parameters:
- the router’s IP address.
- the destination IP address.
- the destination type (a simple host or an entire network).