User`s manual

First Boot-Up and Quick Set-Up
TCP/IP AX3000 User's Manual 11
2.2 - STANDARD QUICK SET-UP
With a standard firmware the quick set-up box is the following:
Quick set-up parameters:
- Keyboard: keyboard nationality. The new value is immediately enabled
(so that the following parameters can easily be entered).
- Number of sessions: maximum number of sessions. These sessions
are automatically associated with the host described above.
- Configuration: virtual terminal settings. This choice is selected from a
list.
- AX3000 IP address
- Default router: optional router IP address.
- Host Name: name of the only accessible host
- Host IP address
- Enable: Configuring printers attached to AX3000. If ‘Pre-defined
Configuration’ is set to 5250 and a hostname is defined, PRT5250 (telnet
printing) is automatically selected. If not LPD is the default printing
system. This setting can easily be changed through interactive set-up.
- Printer Name (accessible only if "Enable" is set): this is the printer name
at the operating system level.
- Manufacturer Type and Model (accessible only with Prt5250): printer
type and model.