User`s manual

Appendix
TCP/IP AX3000 User's Manual 195
Example:
BEGIN_AX_SETUP V1.1
# this is a comment
tcp_host1_name=vangogh
...
END_AX_SETUP
Note: lines beginning with '#' are treated as comments and ignored.
The set-up parameters may be grouped as follows:
Ethernet: Ethernet interface parameters,
TCP/IP: network environment,
AUX1 Port: port service and communication parameters,
AUX2 Port: port service and communication parameters,
Parallel Port: port service,
Multi-session: session numbers, hot keys, etc
Terminal: global parameters (screen, keyboard, etc),
Session 1: session 1 parameters,
... ... ... ... ... ...
Session 8: session 8 parameters.
Several formats are available for set-up parameter values:
List: the possible values are listed (the character '|' is
used as a separator). Example: (yes | no).
Number: maximum and minimum values are given.
IP address format: the IP address format is a.b.c.d.
Character string: maximum length is given.
Note: an ASCII character can be represented by
its hexadecimal ASCII code, preceded by a
backslash character (e.g.: \1B represents Escape
and \\ represents a backslash).
8-colour format: the 8 available colours are black, red, green,
brown, blue, magenta, cyan and white.
16-colour format: the 8 additional available colours are grey,
lt-magenta, lt-green, hi-white, lt-blue,
lt-red, lt-cyan and yellow.