User`s manual

Downloading Firmware
172 TCP/IP AX3000 User's Manual
11.5.2 - The tftp Stage
A tftp error message can originate from either the tftp host or the AX3000.
Depending on the error, the AX3000 firmware may be erased. If this happens
the firmware code will be automatically downloaded (bootp+tftp protocol) the
next time the AX3000 is power-cycled.
Tftp Host Errors:
tftp errno: xxx label
- xxx is the error number,
- label is the error message. This label is sent by the tftp host and is
generated by UNIX running on the tftp host.
Possible errors:
1: File not found
2: Access violation
3: Disk full or allocation exceeded
4: Illegal TFTP operation
5: Unknown transaction Identifier
6: File already exists
7: Illegal TFTP operation
0: User-defined error
For more information, refer to UNIX manuals.
Tftp AX3000 Errors:
tftp errno: xxx
- xxx is the error number.
Possible errors:
10: Ethernet board not responding.
11: no response to the tftp broadcast request (the tftp host is unreachable
or not correctly set-up).
12: network error.
13: the firmware file does not correspond to AX3000 firmware or is not
compatible with the AX3000 model.