User`s manual

Downloading Firmware
166 TCP/IP AX3000 User's Manual
Example for Unix/Linux:
# rsh ax3001 ax_download password /usr/firm 192.168.1.249
Note about password: specify the password if the set-up is password-
protected. (The same password it used).
The message 'Downloading in progress...' is displayed on the
operator’s console if the download runs correctly.
Possible errors (displayed on the operator’s console):
- ERR 105: invalid rcmd command: incorrect keyword (check the
syntax and spelling).
- ERR 108: invalid number of parameters: bad parameter
number (2 or 3 parameters are required after the keyword).
- ERR 109: invalid file length: the filename is too long (more
than 31 characters).
- ERR 110: invalid server: the tftp host name is unknown (not listed
in the AX3000 set-up).
- ERR 111: invalid router: the router name is unknown (not listed in
the AX3000 set-up).
Note: other error messages may also be displayed (connection timed-out, for
example). Refer to the UNIX system manuals for explanations.
For more information about the download process, see Chapter 11.4.