User`s manual

Downloading Firmware
TCP/IP AX3000 User's Manual 165
6 - Change the default TFTP directory:
===> CHGTFTPA ALTSRCDIR('/axfirm')
7 - Stop and restart the TFTP server
===> ENDTCPSVR(*TFTP)
===> STRTCPSVR(*TFTP)
Then download the firmware from the AX3000 interactive set-up (see next
chapter).
11.1.5 - Under Windows
Windows operating systems don't include as a standard feature the tftp and
bootp protocols. In this case, these 2 protocols must be bought and installed as
additional software.
11.1.6 - About Firmware Files
The correct firmware file must be downloaded for your AX3000 hardware.
If FK3 firmware file is downloaded into FK5 hardware, the download process
will fail (error 13, see Chapter 11.5).
For more information, refer to Appendix A.12.
11.2 - DOWNLOADING BY TFTP PROTOCOL
To download firmware using the tftp protocol, the firmware file location (filename
and tftp host IP address) must be given.
11.2.1 - Remote Administration
The remote administration command depends on the operating system. Refer
to the Chapter 5.5 (Unix/Linux), the Chapter 6.4 (OS/400) or the Chapter 7.3
(OS/390).