User`s manual

Installing under OS/400
TCP/IP AX3000 User's Manual 95
Within the 'Session Profile' box. Select "User Defined Key" and press <Space>.
The following box is displayed:
These parameters are:
- <Enter>, <Enter (numpad)>, <Right Ctrl>, <Page Up> and <Page
Down>: a list is used to set these key values (Enter, Field Exit, New Line,
Roll Down and Roll Up).
Note: the same value can be used for several keys.
- Esc: two functions are available for these key:
- "Attention" (and <Shift><Esc> is "System Request")
- "System Request " (and <Shift><Esc> is "Attention")
- <+> and <-> (numpad): the two available values are Field+/Field- and +/-
.
- <.> (numpad): the two available values are the dot (.) and the comma (,).
- Backspace Mode: the two available values are:
- standard: move cursor left
- suppress: deleting the character on the left of the cursor location
- <Alt Gr><F2> -> default port: setting a character string. When the
default auxiliary port mode is set as "ASCII to EBCDIC", this character
string is sent to this port when <Alt Gr><F2> is pressed.
6.1.4 - Setting-Up the Auto-Signon Function
The Auto-Signon function allows a user to open a connection without entering