User`s guide

Remote Administration
________________________________________________________________
TCP/IP AXEL Platine Terminal 95
Consequence: the Set-Up parameter is ignored. The current value of this
parameter is retained.
Solution: check the possible values of this parameter (section 10.5).
ERR 203: xxx: no place to store udk value.
Command:
setup_send
Cause: not enough memory to store the
udk_xxx
parameter (udk
stands for User-Defined Key; a function key for example).
Consequence: the default value of this udk parameter is reloaded.
ERR 204: line(s) after the trailer label ignored.
Command:
setup_send
Cause:
END_AX_SETUP
is not the last line of the file.
Consequence: the lines after the trailer label are ignored. The AX3000 Set-
Up is updated.
Solution: delete these lines.
ERR 211: service name/number error. Service(s) may be reset.
Command:
setup_send
Cause: Other services, such as print or tty, use the same identifier
(TCP port or name).
Consequence: to get a consistent configuration, some services have been
removed.
Solution: check service identifier values.
ERR 212: host error. Host(s) may be reset.
Command:
setup_send
Cause: host parameters are missing or two host names are
identical.
Consequence: to get a consistent configuration, some hosts have been
removed.
Solution: check the host configuration.
ERR 213: too many sessions or pages. Page number set to 1.
Command:
setup_send