User`s guide

TCP/IP Multishell
________________________________________________________________
84 TCP/IP AXEL Platine Terminal
Recompile the updated source file using the following command (where
emul.src is the name of the modified source file):
# tic /usr/lib/terminfo/emul.src <CR>
AX3000 Set-Up:
The 25th status line option must match the ‘Number of Lines’ parameter of the
Platine terminal Set-Up. This parameter can take either of two values:
- 25 lines,
- 24 + 1 message line.
When the tcpmsh program is launched with the '-l' option, the 'Number of
Lines' parameter is set to '24+1 message line' without saving the current value.
The 'Number of Lines' parameter can be modified as follows:

(enter terminal Set-Up)

(select the 'number of lines' parameter)
(select '25 lines' or '24 + 1 message line')

then

(save this configuration)
9.4.7 - '-m' Option: Silent Mode
By default, help messages (number of views, active keys, etc.) are
automatically displayed when tcpmsh is launched. This '-m' option suppresses
these messages.
9.4.8 - '-n' Option: Number of Views
By default, the tcpmsh program supplies 2 multi-shell views. It is possible to
change this limit by setting the '-n x' option, where x stands for the number of
views (from 1 to 8).