User`s guide

TCP/IP Multishell
________________________________________________________________
TCP/IP AXEL Platine Terminal 81
- 'b 2':use with ttypz, ttyqz, ttyrz and ttysz (where z is any
hexadecimal value from 0 to F).
By default, tcpmsh uses the '-b 0' option.
Note: this option is not compatible with use of the '-p' option (see section 9.4.8)
and is not available for AT&T UNIX.
9.4.2 - '-c' Option: Overscan Colour
When tcpmsh software is active, the status line may be used to identify the
current view.
Another way to identify the current view is to associate a different overscan
colour with each view. This can be done using the '-c' option.
The following table lists views and associated overscan colours:
View Colour View Colour
1
Blue
5
Red
2
Light yellow
6
Magenta
3
Green
7
Yellow
4
Cyan
8
White
9.4.3 - '-f' Option: Initial Scripts
A list of command scripts (one per view) can be stored, in a file whose filename
is provided as the argument to the '-f' option.
This command file has a maximum of 8 lines. Each line lists the command
associated with one view:
1
st
line view 1
... ... ...
8
th
line view 8
If a view does not have an initial command, its associated line must start with a
dash character (2Dhex character).