User`s guide

The AXEL Proprietary Network Servers
________________________________________________________________
72 TCP/IP AXEL Platine Terminal
Change to the /tmp directory, then copy the AXEL diskette files to the hard
disk:
# cd /tmp <CR>
# tar xvf /dev/fdx <CR>
where fdx is the device name for the diskette.
Invoke the installation script:
# ./install
From the menu, select the language to be used (English or French) and the
UNIX operating system (AIX, SCO, etc) under which the servers are to run. The
two servers and the AXEL configurator will then be copied to the /etc
directory.
The AXEL configuration utility (/etc/axconf) is automatically run. The
following menu appears:
1) Help
2) Show the Current Configuration
3) Add a Platine/Device Association
4) Add a System Printer
5) Remove a Platine/Device Association
6) Remove a System Printer
7) Quit
Note: the configuration process depends on which UNIX system has been
selected. This menu is different when this AXEL utility is run under AIX (refer to
Chapter 8.3.3).