User`s guide

The AXEL Proprietary Network Servers
________________________________________________________________
TCP/IP AXEL Platine Terminal 71
Note: within this set-up screen, the 'Default Auxiliary Port' field allows
selection of
the port to be used to perform hardcopy and local printing through
escape sequences (CSI 4i and CSI 5i).
8.2.3 - Serial Port Setting

or

(select the auxiliary port configuration)
Operating Mode:
These parameters allow a choice of operating mode for the
selected serial port (AUX1 or AUX2). Two values are available:
- Printer: uni-directional communication (except for
handshaking characters, all data received by the
Platine terminal is dropped)
- Bi-directional peripheral: to connect PostScript
printers, touch screens or serial terminals.
When the Operating Mode is selected, the communication
parameters (baud rate, handshaking, etc) are automatically set.
If necessary, any of these parameters can be modified to match
the peripheral settings.
8.2.4 - Exit the Set-Up

then

(save the current configuration)
8.3 - CONFIGURING THE UNIX SYSTEM
The UNIX System must be configured in MULTI-USER mode with the print
scheduler running.