User`s guide

The AXEL Proprietary Network Servers
________________________________________________________________
TCP/IP AXEL Platine Terminal 69
8.2 - SET-UP THE PLATINE TERMINAL
Up to 3 peripherals can be connected to the Platine terminal (2 bi-directional
serial ports and 1 uni-directional parallel port are available).
A Platine auxiliary port (serial or parallel) can be controlled:
- by escape sequences
- through the printd service (associated with the AXEL printd server)
- through the rtty service (associated with the AXEL ttyd and rprint
servers)
The Terminal Set-Up allows control of each auxiliary port (printd, rtty, etc)
and setting of serial port communication parameters (baud rate, handshake,
etc).
At least one Platine terminal network connection (one session) must be
already established to perform the following steps.
8.2.1 - Enter Set-Up

(enter terminal set-up)
8.2.2 - Auxiliary Port Monitoring

(enter the Terminal Modes screen set-up)
On this screen, the 3 following parameters can be used to associate printd
and rtty services with an available auxiliary port:
- AUX1 Port Service
- AUX2 Port Service
- Parallel Port Service