User`s guide

The AXEL tty Server
________________________________________________________________
56 TCP/IP AXEL Platine Terminal
Use the arrow keys to select the auxiliary port, then press <SPACE>. The
following dialog box appears:
Service : lpd
PRN Name: parallel
Filter : NL=CR+NL
Press <SPACE> again to select the service. The following menu appears:
None
printd
rtty
lpd
rcmd
rtelnet
tty
Within this menu, use the vertical arrow keys to select the required
tty
service
and press <RETURN>.
If the selected port is a serial one, press <F3> to configure AUX1 (or <F4> to
configure AUX2). Parallel ports need no configuration.
The Operating Mode parameter set-up defines the mode of the serial port
selected. Press <Space> to select the operating mode:
- Printer: uni-directional communication (except for handshaking
characters, all data received by the Platine terminal is dropped)
- Bi-directional peripheral: to connect PostScript printers, touch screens,
etc.
When the Operating Mode is selected, the communication parameters (baud
rate, handshaking, etc.) are automatically set. If necessary, any of these
parameters can be modified to match the peripheral settings.
Press <F12> then <CR> to save modifications and exit Set-Up.