User`s guide

The Terminal Server
________________________________________________________________
50 TCP/IP AXEL Platine Terminal
6.1.3 - Exiting the Set-Up
Press <F12> then <RETURN> to save the current configuration and to exit
Set-Up.
6.2 - TCP/IP SET-UP
When the rtelnet service is associated with one serial port, it is necessary to
associate this port with a UNIX host (in the same way, a session is also
associated with a UNIX host).
Press <Ctrl><Alt><
> to enter TCP/IP Set-Up.
Sessions
Status Line
Add View
Add AUX1
Add AUX2
Drop
Use the arrow keys to select the 'Add AUX1' or 'Add AUX2' option according to
which serial port is being used.
Note: if the rtelnet is not associated with the selected serial port (within
Terminal Set-Up), an error message is displayed.
To set an association, enter the following four parameters:
- Hostname enter the name of a host (which must have been
previously declared in the 'Network' menu, through
the 'Add Host' option - refer to Chapter 2.2.3).
- TERM enter the TERM value (an alphanumeric string, ansi
for example) associated with this view. The default
TERM values are listed in Chapter 3.2.