User`s guide

The Terminal Server
________________________________________________________________
TCP/IP AXEL Platine Terminal 49
Use the arrow keys to select the auxiliary port, then press <SPACE>. If the
current service is
printd
,
rtty
,
rcmd
or lpd, the following dialog box
appears:
Service : printd
TCP Port : 2048
Filter : none
Press <SPACE> again to select the service. The following menu appears:
None
printd
rtty
lpd
rcmd
rtelnet
Note: if the current service is
None
or
rtelnet
, the menu appears
immediately and the dialog box is omitted.
Within this menu, use the vertical arrow keys to select the
rtelnet
service
and press <RETURN>.
6.1.2 - Serial Port Setting
It is necessary to set the operating mode and the communication parameters of
the selected serial port.
Press <F3> to set-up the AUX1 port or press <F4> to set-up the AUX2 port.
First, use the arrow keys to select the Operating Mode field and press
<SPACE> to select the 'Bi-directional Peripheral' value.
When an operating mode is selected, the communication parameters (baud
rate, handshake, etc) are automatically set. If necessary, any of these
parameters can be modified to match the peripheral settings.