User`s guide

Standard Print Servers
________________________________________________________________
42 TCP/IP AXEL Platine Terminal
The PRN Name field displays the auxiliary port name. This name will also be
the name used by
lpd
for the connected printer.
The Filter field (only available with
lpd
) allows line feed (NL) to be mapped to
carriage return plus line feed (CR NL). 0Ah is mapped to 0Dh 0Ah.
Note: within this set-up screen, the 'Default Auxiliary Port' field allows
selection of
the port to be used to perform hardcopy and local printing through
escape sequences (CSI 4i and CSI 5i).
5.1.2 - Serial Port Setting
When a serial port is used, it is necessary to set its operating mode and its
communication parameters.
Press <F3> to set-up the AUX1 port or press <F4> to set-up the AUX2 port.
First, use the arrow keys to select the Operating Mode field and press
<SPACE> to select the 'Printer' value.
When an operating mode is selected, the communication parameters (baud
rate, handshake, etc) are automatically set. If necessary, any of these
parameters can be modified to match the peripheral settings.
5.1.3 - Exiting the Set-Up
Press <F12> then <RETURN> to save the current configuration and exit
Set-Up.
5.2 - CONFIGURING THE UNIX SYSTEM
Two utilities are available to control an AX3000's printers:
- lpd: the AX3000's printer is seen as a remote system printer (accessed
by the lp, lpstat and cancel commands) but some options of the lp
command are not available.