User`s guide

Using the Multi-Session
________________________________________________________________
36 TCP/IP AXEL Platine Terminal
4.2 - USING WITH SET-UP
If no View/Host association has been defined, the following message is
displayed when the Platine terminal is turned on:
No Pre-programmed View
In this case, the connection to a host will have to be made via TCP/IP Set-Up.
To enter TCP/IP Set-Up, use the following keystroke combination:
The TCP/IP Set-Up menu is displayed as follows:
The TCP/IP Set-Up appears as a menu bar and several pull-down menus.
Within these menus, use the arrow keys to select a function and confirm it by
pressing the <RETURN> key.