User`s guide

Using the Multi-Session
________________________________________________________________
34 TCP/IP AXEL Platine Terminal
This chapter describes the use of the TCP/IP AX3000 Multi-session and the
View/Host associations.
AXEL TCP/IP Platine terminals provide multiple and concurrent
connections. This feature allows simultaneous access to multiple hosts and
applications.
To switch between views (sessions), use the following keystroke combination:
Where <Fx> represents whichever of the <F1> to <F8> function keys
corresponds to the view number required.
Notes:
- These keystrokes can be changed through the Terminal Set-Up (for more
information refer to the
User's Guide ).
- If a session uses the VT AS400 emulation, the multi-session keystrokes
are <Alt><Shift><Fx>.
The settings for a session may differ according to the View/Host association
declared during TCP/IP Set-Up.
4.1 - USING WITH VIEW/HOST ASSOCIATIONS
The association, of views with one or more hosts, provides automatic
connections and makes the Platine terminal very easy to use. Automatic
connections are performed when the Platine terminal is turned-on (refer to
chapter 2.3.2) and when switching from one view to another.